English
Français
Español
Italiano
Stabilizer Cotton Fix
From: Madeira
Suitable for stretch materials, like T-shirts and polo shirts. Adhesive Tear Away is also suitable for mounting sheer fabrics and difficult to mount items, like ties and caps. The backing fabric is already sticky (no heat required) multi-directional and easy tear, easily removed and repositioned if required without leaving a sticky residuMadeira Non-woven tear away stabilizer with paper backed release sheet. Especially good for freehand embroidery, and ideal for delicate and sensitive fabrics.
100% Cotton. 25cm x 3m (10" x 3.3 yds)
Read the post on this product in our blog
There are no reviews at the moment. Write your review
[ACCTC-9439 #69630]Accessories Other Hobbies
The product you have been looking for is not available in our catalog and/or it has been cancelled. We are sorry!
Customers who bought this product also purchased ...
Madeira - Bestsellers
Stabilize your embroidery!
These products are actually not so well-known. Who among you have ever used them? But, once you know what they are, you cannot work without them!
Stabilizers are support films for embroidery. Once the work finished, they can be easily removed or with a simple cut (collection Cut Away), or with some water (collection Wash Away) or with a light rip (collection Tear Away). In short, these are light transparent films above all ideal for embroideries on sponge tissues which avoid the sinking of stitches. They are very useful for sewing machine works or when sewing light fabrics like silk which usually slide and move during one's embroidering. Moreover, stabilizers are used a lot in patchwork and quilt works.
Just to let you know something more about the stabilizers, here are their instructions:
Cut the stabilizer from the roll as much as you want and put it under the fabric to embroider. Fix both of them in the embroidery hoop – the fabric must be on the upper side. After the embroidery, take off the exceeding stabilizer. For the application with the sewing machine, put the stabilizer under the fabric where the application must be done. After the application, take off carefully the exceeding stabilizer. For the paper-piecing design instead the pattern with a pencil on the stabilizer. After the sewing of the fabric pieces, take off the plus stabilizer.
These products are actually not so well-known. Who among you have ever used them? But, once you know what they are, you cannot work without them!Stabilizers are support films for embroidery. Once the work finished, they can be easily removed or with a simple cut (collection Cut Away), or with some water (collection Wash Away) or with a light rip (collection Tear Away). In short, these are light transparent films above all ideal for embroideries on sponge tissues which avoid the sinking of stitches. They are very useful for sewing machine works or when sewing light fabrics like silk which usually slide and move during one's embroidering. Moreover, stabilizers are used a lot in patchwork and quilt works.
Just to let you know something more about the stabilizers, here are their instructions:
Cut the stabilizer from the roll as much as you want and put it under the fabric to embroider. Fix both of them in the embroidery hoop – the fabric must be on the upper side. After the embroidery, take off the exceeding stabilizer. For the application with the sewing machine, put the stabilizer under the fabric where the application must be done. After the application, take off carefully the exceeding stabilizer. For the paper-piecing design instead the pattern with a pencil on the stabilizer. After the sewing of the fabric pieces, take off the plus stabilizer.
© Cenina S.r.l.
VAT : IT01651310516 - R.E.A. 128424
Fax: +39-0575-033115 - Tel: +39-0575-421407
E-Mail: [email protected]
VAT : IT01651310516 - R.E.A. 128424
Fax: +39-0575-033115 - Tel: +39-0575-421407
E-Mail: [email protected]